This new catalog covers all of the HAM standard Inch and Metric Drills which are manufactured at our state of the art facility located in Germany.  In addition, many of these tools are stocked at TFE location in Toronto Canada ready to ship freight free to our customers. 

• HAM Twist Drills – For universal workpiece materials
• HAM Superdrills – High performance, diameter 2.8mm up to 20.0mm, 3xD – 12xD 
• HAM Nirodrill – High performance for Stainless Steel 3mm up to 20.00mm, 3xD – 8xD 
• HAM Multidrills – Straight Flute 4 margin Geometry for Aluminum and Cast Iron 4mm up to 20mm, 3xD – 12xD
• HAM Deep Hole Drills – Extra-long drills from 0.8mm up to 16.0mm, 3xD – 40xD

HSF TECHNOLOGY (Hybrid Surface Finish)

• Optimal chip removal
• Reduction of built-up edges
• Defined cutting edge rounding
• Homogeneous and reproducible surfaces can be reached
• Higher cutting speeds and feed rates are possible
• Reduced cutting forces
• Less heat generation in tool and work piece

​

We are proud to present our Alu Cut product, that has been developed with unique internal cooling and has the following features:

• Suitable for dry machining, minimum quantity lubrication as well as with cooling lubricant.
• 40% faster machining time.
• Better chip removal and no vibrations due to HSF surface treatment and centralized internal cooling.
• Suitable for immersion in a ramp up to 45°.

​
Minimal Burr Free Drills are quoted per diameter, length, size of burr and material being drilled and are not an off the shelf item.  If you have an application and would like more information or a quote, please reply to this email. 

Minimal Burr Free Drills are quoted per diameter, length, size of burr and material being drilled and are not an off the shelf item.  If you have an application and would like more information or a quote, please reply to this email. ​

This new catalog covers all of the HAM standard Inch and Metric Drills which are manufactured at our state of the art facility located in Germany.  In addition, many of these tools are stocked at TFE location in Toronto Canada ready to ship freight free to our customers. ​

​With the new Hybrid Surface Finishing (HSF), HAM is launching a polishing process in which all tool surfaces are hyper smooth polished with defined and re-produceable main and secondary cutting edge preparation.

HAM has been developing high-performance tools for the machining of all conventional materials for many years. This also includes modern materials such CFRP, titanium, honeycomb, aluminum and composite sandwich materials.

One of the biggest challenges with modern materials is the machining. For example, CFRP is highly abrasive and titanium is a long-chipping material with very poor thermal conductivity. The result is a very high temperature on the tool cutting edge, which leads to enormous tool wear and consequently also to a shorter tool life.

Temperature developments on the cutting tool and in the workpiece to be machined have to be avoided. Another goal is to avoid built-up edges – i.e. material adhesion or welding on the cutting edge of the tool and stuck chips in the flutes which would lead to tool breakage.