 Meet ExcelCool 466… A chlorine free, semi-synthetic concentrate for moderate to heavy duty machining. 466 is designed for use in a variety of grinding and cutting applications on cast iron, high strength steel alloys, stainless steel, and most non-ferrous substrates. 466 includes a combination of wetting, lubricity, and extreme pressure additives that have shown excellent resistance to biological degradation! Ferrous Metals: Recommended at 5-10% dilution for general machining. Concentrations above 10% are not normally recommended, but may be required for harder alloys or more difficult operations such as form tapping and heavy broaching. Non-Ferrous: Should be used from 5-10% for most substrates including aluminum alloys, brass, and bronze. Stain testing of the specific aluminum alloy being machined is always recommended before use. Eastern Oil Company will provide compatibility testing at no charge. Eastern Oil Company is ISO 9001 Registered  PAY ON PERFORMANCE GUARANTEE ExcelCool 466 Risk-Free Trial Avoid Downtime. Extend Tool Life. Maximize Sump Life. We’ll help with an analysis of your CNC application, system evacuation and refilling. Contact your local Metal Cutting Specialist representative about our no obligation, pay on performance ExcelCool 466 guarantee! Contact your local representative: Alan Novack (313) 590-9187 Jason VerSluys (330) 962-4980 Tim Stinnett (317) 430-7836 *Please use the last field to qualify and tell us a little bit about your machining application. The Pay on Performance Guarantee subject to approval, some restrictions may apply . Subject to approval, some restrictions may apply. Comments are closed.
|
RSS Feed